Какви са енергийните технологии на оборудване за изпаряване и концентрация?
1. Вторично възстановяване на пара
The secondary steam generated during the evaporation process is introduced into the heat exchanger to preheat the cold materials to be processed, reducing the consumption of external heat sources. The secondary steam is pressurized and heated by the steam compressor, so that it can participate in evaporation as a heating source again, forming a closed cycle, greatly reducing the dependence on external steam.
2. Приложение на високоефективни компоненти за топлообмен
Use corrugated or special-shaped heating tubes to increase the heat transfer area and fluid turbulence, thereby improving heat transfer efficiency. Use materials with better thermal conductivity to make heat exchange components, reduce heat loss during the transfer process, and generate more evaporation with the same energy.
3. Динамичен контрол на работните параметри
Adjust the heating intensity in real time according to the change of material concentration to avoid energy waste caused by overheating. Optimize the circulation speed of the liquid material to reduce the power consumption of the circulation pump while ensuring the evaporation effect, so as to reduce the overall energy consumption of the system.
4. Интеграция на системата за много ефекти на изпаряване
Multiple evaporators are operated in series, and the secondary steam generated by the previous effect is used as the heating source for the next effect, and the thermal energy of the steam is utilized step by step. By reasonably allocating the pressure and temperature of each effect, the steam energy can be utilized in stages, significantly reducing the steam consumption per unit evaporation volume.
5. Възстановяване на отпадъчна топлина и отпадъчна топлина
The heat from the condensed water and high-temperature tail gas discharged by the equipment is collected and used to preheat the boiler water or workshop heating to improve the comprehensive utilization rate of energy. For other low-temperature waste heat generated during the production process, the temperature is raised through heat pump technology and then reused in the evaporation system to achieve energy recycling.
Ако искате да знаете повече за оборудването за изпаряване и концентрация, моля, свържете се с Wuxi Suyang Chemical Equipment . Нашият екип от експерти ще ви предостави подробни отговори и персонализирани услуги .
